47
OPERATING PROCEDURE
PHOTOS
Photo 6
Defrost
thermistor
5. Removing outdoor fan motor
(1) Remove the cabinet and panels. (Refer to 1.)
(2) Disconnect the connectors for outdoor fan motor.
(3) Remove the propeller nut. (See Photo 7.)
(4) Remove the propeller. (See Photo 7.)
(5) Remove the screws fixing the fan motor. (See Photo 7.)
(6) Remove the fan motor.
Photo 8
6. Removing the compressor and 4-way valve
(1) Remove the cabinet and panels. (Refer to 1.)
(2) Remove the inverter assembly. (Refer to 2.)
(3) Recover gas from the refrigerant circuit.
NOTE:
Recover gas from the pipes until the pressure
gauge shows 0kg/cm
2
(0 MPa).
(4) Detach the welded part of the suction and the discharge
pipe connected with compressor.
(5) Remove the nuts of compressor legs.
(6) Remove the compressor.
(7) Detach the welded part of pipes connected with 4-way
valve. (See Photo 8.)
Photo 7
Propeller
Screws of the outdoor fan motor
Welded parts of 4-way valve
OBH469--2.qxp 07.1.22 1:31 PM Page 47
Содержание MUZ-GC25VA
Страница 7: ...7 6 WIRING DIAGRAM MUZ GC25VA ...
Страница 8: ...8 MUZ GC25VAH ...
Страница 9: ...9 MUZ GC35VA ...
Страница 10: ...10 MUZ GC35VAH ...