27
11-1. CAUTIONS ON TROUBLESHOOTING
1. Before troubleshooting, check the following
1) Check the power supply voltage.
2) Check the indoor/outdoor connecting wire for miswiring.
2. Take care of the following during servicing
1) Before servicing the air conditioner, be sure to turn OFF the main unit first with the remote controller, and then after
confirming the horizontal vane is closed, turn OFF the breaker and/or disconnect the power plug.
2) Be sure to turn OFF the power supply before removing the front panel, the cabinet, the top panel, and the electronic
control P.C. board.
3) When removing the electrical parts, be careful of the residual voltage of smoothing capacitor.
4) When removing the electronic control P.C. board, hold the edge of the board with care NOT to apply stress on the
components.
5) When connecting or disconnecting the connectors, hold the housing of the connector. DO NOT pull the lead wires.
TROUBLESHOOTING
11
3. Troubleshooting procedure
1) Check if the OPERATION INDICATOR lamp on the indoor unit is flashing on and off to indicate an abnormality.
To make sure, check how many times the OPERATION INDICATOR lamp is flashing on and off before starting serv-
ice work.
2) Before servicing, check that the connector and terminal are connected properly.
3) When the electronic control P.C. board seems to be defective, check the copper foil pattern for disconnection and the
components for bursting and discoloration.
4) Refer to 11-2 and 11-3.
Lead wiring
Housing point
<Incorrect>
<Correct>
MUZ-FH25VE
MUZ-FH35VE
MUZ-FH50VE
OBH624B
Содержание MUZ-FH25VE-E1
Страница 9: ...9 WIRING DIAGRAM 6 MUZ FH25VE E1 MUZ FH35VE E1 MUZ FH25VE E2 ER1 ER2 MUZ FH35VE E2 ER1 ER2 OBH624B ...
Страница 10: ...10 MUZ FH50VE E1 OBH624B ...
Страница 11: ...11 MUZ FH50VE ER1 OBH624B ...
Страница 47: ...47 2 Relay P C board MUZ FH50VE To inverter P C board CN681 CN680 CN60 L68B L68A 10 VDC OBH624B ...