Mitsubishi Electric MSZ-LN09VFB, Руководство по эксплуатации

Страница: 8 / 36

En-7
● OPERATING INSTRUCTIONS ●
Press to select fan speed. Each press changes
fan speed in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
• Use higher fan speed to cool/heat the room quicker. It is recommended
to lower the fan speed once the room is cool/warm.
• Use lower fan speed for quiet operation.
(AUTO) (Silent) (Low) (Med.) (High) (Super High)
Press to select airfl ow direction. Each
press changes airfl ow direction in the following order:
(AUTO) .........The vane is set to the most effi cient airfl ow direction. COOL/
DRY/FAN: horizontal position. HEAT: position (4).
(Manual) .......For efficient air conditioning, select the upper position for
COOL/DRY, and the lower position for HEAT. If the lower
position is selected during COOL/DRY, the vane automatically
moves to the upward position (1) after 0.5 to 1 hour to prevent
any condensation from dripping.
(Swing) .........The vane moves up and down intermittently.
• Two short beeps are heard from the indoor unit when set to AUTO.
• Always use the remote controller when changing the direction of air-
flow. Moving the horizontal vanes with your hands causes them to mal-
function.
• When the breaker is turned on, the horizontal vanes’ position will be
reset in about a minute, then the operation will start. The same is true
in the emergency cooling operation.
• When the horizontal vanes seem to be in an abnormal position, see
page 15 .
• The right and left horizontal vanes set to the same level may not align
perfectly.
(AUTO) (1) (2) (3) (4) (5) (SWING)
F
AN SPEED AND AIRFLOW DIRECTION ADJUSTMENT
Press to select airfl ow direction. Each press
changes airfl ow direction in the following order:
(SWING)
Left-right Airflow direction
Fan speed direction
Up-down Airflow direction
JG79Y185H01_en.indd 7 11/29/2016 8:48:12 AM