En-5
● OPERATING INSTRUCTIONS ●
M
OVE EYE OPERATION
1
Press
during COOL, DRY, HEAT and AUTO
mode to activate the move eye control mode.
• Press gently using a thin instrument.
•
lights. (Operation display section)
• The default setting is “active”.
2
Press
several times to cancel the move eye
control mode.
Note:
Any person at the following places cannot be detected:
• Along the wall on which the air conditioner is installed
• Directly under the air conditioner
• Where any obstacle, such as furniture, is between the person and the air
conditioner
A person may not be detected in the following situations:
• Room temperature is high.
• A person wears heavy clothes and his/her skin is not exposed.
• A heating element of which temperature changes significantly is present.
• Some heat sources, such as a small child or pet, may not be sensed.
• A heat source and the air conditioner are more than 6 m apart.
• A heat source does not move for a long time.
Do not touch the move eye sensor. This may cause malfunction of the move
eye sensor.
The intermittent operating sound is a normal sound produced when the move
eye sensor is moving from side to side.
Refer to
page 8
“Absence Detection” for
and
.
In the move eye control mode, the room temperature is controlled based
on the sensible temperature.
Cancel
JG79Y185H01_en.indd 5
11/29/2016 8:48:10 AM
Содержание MSZ-LN09VFB
Страница 34: ...A4_white_tombo indd 1 2016 04 25 10 16 47 ...
Страница 35: ...A4_white_tombo indd 1 2016 04 25 10 16 47 ...
