24
Model
COOL mode of
"I FEEL CONTROL"
DRY mode of
"I FEEL CONTROL"
HEAT mode of
"I FEEL CONTROL"
Initial room temperature
Initial set temperature
26
:
26
:
or more
26
:
or less
23
:
or less
23
:
to 25
:
24
:
Initial room temperatureminus 2
:
Initial room temperatureminus 2
:
❈
1
4. The initial set temperature is decided by the initial room temperature.
9-1. “I FEEL CONTROL” (
) OPERATION
1. Press OPERATE/STOP(ON/OFF) button on the remote controller. POWER MONITOR lamp of the indoor unit will turn
on with a beep tone.
2. Press OPERATION SELECT button to set “I FEEL CONTROL”(
) Then a beep tone is heard.
3. The operation mode is determined by the room temperature at start-up of the operation.
Example
Previous opera-
tion
COOL mode of
“I FEEL CONTROL”
●
Once the mode is fixed, the mode will not change by room temperature afterwards.
●
Under the ON-TIMER (
) operation, mode is determined according to the room temperature as the operation
starts.
●
When the system is stopped with the OPERATE/STOP(ON/OFF) button on the remote controller, and restarted within 2
hours in “I FEEL CONTROL” (
) mode, the system operates in previous mode automatically regardless of the room
temperature.
Mode
COOL mode of
"I FEEL CONTROL"
DRY mode of
"I FEEL CONTROL"
HEAT mode of
"I FEEL CONTROL"
Initial room temperature
more than 25
:
23
:
to 25
:
less than 23
:
Example
Previous opera-
tion COOL mode of
“I FEEL CONTROL”
or COOL mode
When the system is restarted after 2 hours, the operation mode is determined by the initial room temperature at start-up
of the operation.
Restart
COOL mode of “I FEEL
CONTROL”
Restart
COOL or DRY or HEAT
mode of “I FEEL CONTROL”
that determined by room
temperature start-up of the
operation.
❈
1 When the system is restarted with the remote controller, the system operates with the previous set temperature regard-
less of the room temperature at restart.
The set temperature is calculated by the previous set temperature.
OB230-1.qxp 02.5.28 7:36 PM Page 24
