A-309
SYSTEM CONTROL
CEILING
CASSETTE PM
Main Sub
1
2
3
Main
(00)
Outdoor unit; (00)...Refrigerant address
(SW1; 3~6)
Indoor unit; (00)–
w
Indoor unit number
(auto setting)
Refrigerant address
(receiving from the
outdoor unit)
(00)-1
(00)-2
(00)-3
Sub
1
2
2
2
3
Outdoor unit; (00~02)...Refrigerant address
(SW1; 3~6)
Indoor unit; (00~02)–
w
Indoor unit number
(auto setting)
Refrigerant address
(receiving from the
outdoor unit)
Main
(00)
(00)-1
(00)-2
(01)-1
1
(01)
1
(02)
1
2
2
2
(02)-1
(02)-2
2
3
3
3
3
PMH-P·BA
VARIETY OF SYSTEM CONTROL FUNCTIONS
(1) System construction
A-control model which just wires the connecting line between the indoor and outdoor unit and supply the power is applicable
to any models of standard (1:1), twin and triple.
CEILING CASSETTE PM SERIES PMH-P·BA
Remote controller
Indoor unit
Outdoor unit
V
arious setting
Remarks
System construction
Remote controller
Indoor unit
Outdoor unit
V
arious setting
Remarks
System construction
Standard 1:1
Synchronized twin. Triple
1
Unit (indoor/outdoor) power supply L/N
2
Connecting line between the indoor and
outdoor; S1/S2/S3, Polarized 3-wire
3
Remote controller transmission line; Non
polarezed 2-wire
1
Unit (indoor/outdoor) power supply L1/L2/L3/N
2
Connecting line between the indoor and
outdoor; S1/S2/S3, Polarized 3-wire
3
Remote controller transmission line; Non
polarezed 2-wire
Remote control main/sub setting necessity
(In case of 2 remote controllers)
Remote control main/sub setting necessity
(In case of 2 remote controllers)
No setting
No setting
No setting (initial setting)
No setting (initial setting)
(1) Indoor unit number is set automatically
Group control
1
Unit (indoor/outdoor) power supply L1/L2/L3/N
2
Connecting line between the indoor and outdoor; S1/S2/S3, Polarized 3-wire
3
Remote controller transmission line; Non polarezed 2-wire
Remote control main/sub setting necessity
(In case of 2 remote controllers)
No setting (initial setting)
Refrigerant address setting; SW1; 3~6
(1) Indoor unit number is set automatically
(2) When the refrigerant address of the unit is “00”, Remote controller is supplied.
A.6.15 SYSTEM CONTROL