45
<How to operate>
To change the airflow direction, press
button.
(1) COOL/DRY operation
At the start-up of COOL or DRY operation, the airflow direction in automatically set to 10°. After, it can be changed to
another direction with
button on the remote controller.
<Auto return>
When 60° or 70° airflow is set with fan speed on LOW, “AUTO RETURN” appears below the room temperature display.
One hour later the direction changes to 10°, automatically and “AUTO RETURN” disappears.
(2) HEAT operation
At the start-up of HEAT operation, discharge direction depends on the setting of the last operation.
After, it can be changed to another direction with
button. The discharge direction shifts to 10° regardless of the remote
controller settings under any of the following conditions.
●
Thermostat OFF
●
Defrosting
●
Indoor fan speed EXTRA-LOW in hot adjustment
Available in COOL operation with fan speed on HIGH or
in HEAT operation.
Unavailable in DRY operation.
If fan speed changes from LOW to HIGH during 30°
downward airflow in COOL mode, the direction auto-
matically changes to 10°.
10˚
30˚
60˚
70˚
Swing
Changes by pressing
the button.
FILTER
CHECK MODE
TEST RUN
241
2-5 Auto vane control
