2
1
PART NAMES AND FUNCTIONS
●
Indoor Unit
Air intake
room air is suctioned
in here.
(Removes dust and dirt from the intake air.)
Disperses airflow up and
down as well as adjusts the
angle of air flow direction.
Filter
Air intake grill
Air outlet
Air outlet
Swing louvers
Air flow can be changed to horizontally
by moving the Guide vane to the left or
right.
Guide vane
●
Remote controller
●
Once the operation of the unit is set, subsequent operations can only be performed by pressing the ON/OFF button
repeatedly.
FILTER
CHECK MODE
TEST RUN
241
w
button
This switches between continuous
operation and the timer operation
l
button
The sets the ventilation fan speed.
●
Operation buttons
q
button
This sets or switches the current
time, start time and stop time.
a
button
Press this button to switch the cooler
electronic dry (dehumidify), automat-
ic and heater modes.
i
TEMP. button
This sets the room temperature. The
temperature setting can be per-
formed in 1°C units.
Setting range :
Cooler 19°C to 30°C
Heater 17°C to 28°C
CHECK-TEST RUN button
Only press this button to perform an
inspection check or test operation.
Do not use it for normal operation
FILTER button
This resets the filter service indica-
tion display
j
button
This adjusts the vertical angle of the
ventilation.
ON/OFF button
This switches between the operation
and stop modes each time it is
pressed. The lamp on this button
lights during operation.
The model name of the remote con-
troller is indicated.
PAR-JH241KA(2.5 ~ 4)
PAR-JH150KA(1.6/2)
k
button
This switches the horizontal fan
motion ON and OFF.
(This button does not operate in this
model.)