background image

12

1

2

The unit performs operation automatically while monitoring the temperature and humidity in the room, thus alleviating 
the need for advanced operation settings.
Use EASY DEHUMIDIFYING when you want to dehumidify the room and INTELLIGENT LAUNDRY when you want to 
dry laundry.

When you want to perform automatic 

1

Press 

The POWER lamp lights. 
The current humidity is displayed. 
The louvre opens and airfl ow starts. 

2

Press 

 to select the 

operating mode

Changes with every press. 

INTELLIGENT LAUNDRY Operation 

Use the swing louvre and make sure that air is 

blowing onto all of the clothes 

P16

EASY DEHUMIDIFYING Operation

Use the swing louvre as desired.

Information

Press the HUMIDITY SELECTION switch 
during operation in EASY DEHUMIDIFYING or 
INTELLIGENT LAUNDRY mode to switch to the 
AUTO operation. 

P13

<To stop operation>

Press 

The POWER lamp goes out.
The operating mode indicator 
disappears.

Information

If the drying inside operation (auto) is 
set, it starts after operation stops. 

P19

Information

The compressor does not activate immediately 
after turning the unit off, or after plugging the unit 
into the power socket.

 (This is in order to protect the 

compressor.) 

Dehumidifying begins approximately 

3 minutes after you press the POWER switch. 
When dehumidifying begins, the operational noise 
increases.

 

The unit remembers the operating mode. Even if the 
plug is disconnected or the power turned off, the unit 
restarts at the previous setting.

EASY DEHUMIDIFYING

The unit operates intermittently controlling the 
airfl ow to remove the damp feeling in the air. When 
the room temperature is high, the blower operates 
to reduce the rise in room temperature.
Select this when you want to maintain a 
comfortable humidity level

Once the set humidity level is reached the airfl ow 
and louvre operations will stop.

Rough Guide 
on Usage

Size of room

Up to approx. 21 m

2

Keep usage within the ranges specifi ed in “Rough 
Guide on Usage” to ensure effi cient drying.

If the room is large, the humidity level may not 
fall to the set humidity level.

Set Humidity Level (%)

If the room temperature is below 
27°C, the unit changes the set 
humidity level according to the 
room temperature, and starts 
dehumidifying.

If the room temperature is above 27°C, the unit 
dehumidifi es until the humidity level reaches 50%, 
and then activates the blower. The dehumidifi er is 
reactivated when the humidity level rises to 60%.

50

20

30

27

60

Room 
Temperature
(°C)

e̲mj̲e26cx̲h.indb   12

e̲mj̲e26cx̲h.indb   12

2009/10/26   17:22:22

2009/10/26   17:22:22

Содержание MJ-E26CX-H



























Отзывы: