20
Draining
The unit automatically shuts down and lights the Tank full lamp when the tank is full.
Empty the tank.
When the tank becomes full, the FULL lamp lights.
Tank full lamp lights.
(The unit beeps continuously).
Blowing stops (louvre stops).
The operation indicator lamp turns off.
Information
After removing the water and replacing the
tank, the Tank full lamp will go off, and the
unit will automatically return to operation
mode.
When the Tank full lamp is lit, no operation
but ON/OFF is possible.
When using the OFF timer, you are only
notifi ed by the FULL lamp lighting.
1
Remove the water tank.
Grasp handle and
slide out.
If you remove the
tank, the FULL lamp
lights.
<Hold the tank this way>
2
Remove the tank lid, and pour
out the water.
Floating element
Do not remove this.
Tank lid
Tank guard
Pour the water
out as shown.
3
Slide the tank lid to close the
tank.
4
Check the tank, and fi rmly
push it all the way in.
Tank
Make sure the tank is not
broken or cracked
Tank lid
Tank guard
Make sure it is
inserted correctly
A beep is heard and the lamp turns off.
Information
Secure the lid and guard properly or else the tank
may become stuck.
If the tank is not installed correctly, the tank full light
will come on, and the unit will not operate.
Note
Do not remove or dismantle the fl oating element in the
tank. If it is removed, the unit cannot detect when the
tank is full, and this could result in leakage.
e̲mj̲e26cx̲h.indb 20
e̲mj̲e26cx̲h.indb 20
2009/10/26 17:22:24
2009/10/26 17:22:24
