background image

4

CAUTION

Do not use combustion appliances
in the path of the 
air outlet.

This may cause 

incomplete combustion

in the appliance.

Do not use the unit in places
where chemicals are used (such
as hospitals, factories,
laboratories or beauty salons).

Chemicals and solvents evaporated in the 
air may harm the unit and cause water in the
tank to leak, 

resulting in damage to

property

.

Do not use the unit for special
purposes, such as preservation of
food, art or scientific works.

This may negatively affect 

the quality of the items stored

.

Do not drain water continuously if
there is a possibility that
temperature around the hose could
drop to freezing point.

Water inside the hose may freeze and prevent
the water in the tank from flowing out.
The water may leak from the unit and 

damage

surrounding objects

.

Do not use the unit in places 
that may be subject to oil or
flammable gas leakage.

Such a leak around the unit may cause

combustion

and 

fire

.

Do not remove the 
Styrofoam from the 
floating element.

The floating element will not 
be able to detect a full tank 
resulting in water leakage, which may

damage surrounding objects or cause
electric shock and/or an electric leak

.

Do not wash the unit 
with water. Do not 
use the unit where it 
is likely to come in 
contact with water.

Exposure to water may result in 

fire or

electric shock caused by an electric leak 

.

Do not point air-flow from the unit
directly at the body.

If air-flow is directed at the
body for long periods, it
may 

harm one’s physical

condition

and 

lead to

dehydration

.

Install the unit in a location where
the floor is flat and stable.

If the unit falls over, the water collected in the
water tank may leak 

damaging surrounding

objects and in turn result in fire or electric
shock caused by an electrical leak

.

Grasp the plug and 
remove from the 
power socket.

When removing the plug from 
the power socket, do not pull on it diagonally
or by the cord as this may cause the
projections/wiring to be damaged resulting in

a short circuit, electric shock or fire

.

Before moving the unit always
switch it off, unplug it and remove
water from the water tank.

Moving the unit with water in its tank may
cause the water to leak and 

damage the

surrounding objects and in turn result in
electric shock and/or an electric leak

.

Do not cover the front or side air
intakes or the air outlet with cloth,
curtain, etc.

This results in poor ventilation and 
may cause 

heat generation/fire

.

Do not stand on, sit on or lean
against the unit.

The unit may tip over causing 

injury

.

Do not put vases or any other
objects filled with water on the unit.

Water may leak into the unit adversely affecting
electric insulation and cause 

electric shock

and/or fire by short-circuiting

.

Do not use the unit where it may be
exposed to direct sunlight or other
weather conditions. (This unit 
is for indoor use only.)

This may cause 

overheating,

electric shock and/or fire 
caused by an electric leak

.

Do not use the unit in narrow,
enclosed places such as inside
closets, between 
pieces of furniture, etc.

This results in poor 
ventilation and may cause 

heat generation and/or fire

.

Precautions (cont.)

e_mj_e16v_s1(01_09)_e33.qx  6/8/05 2:56 PM  Page 4

Содержание MJ-E16V-S1



















Отзывы: