background image

E

11

Operating

<Drying inside operation>

This operation takes approximately one hour. However, when the room

temperature is below 1°C, drying time is shortened to protect the compressor.

Drying inside

The inside of the unit can be dried to suppress mildew growth on the cooler.
On days the dehumidifier is used, drying inside is recommended.

Press

while the unit is on

Press

while the unit is off

To abort drying inside

Press the drying inside button while the unit is
performing internal cleaning (the drying inside
lamp turns off)

The power button does not abort drying inside.
(Normal operation begins.)

It is recommended that the louvre be set upright when using drying inside.

(Closing the louvre may

produce noise.)

Connecting/disconnecting the power plug deactivates automatic operation.

This function does not remove existing mildew. Also, aborting drying inside may cause the benefits to
diminish.

The moisture expelled from inside the unit may cause the humidity level of the room to rise.

The air leaving the unit may appear white depending on the humidity or temperature of the room.

The moisture expelled from inside the unit may smell due to odorants that were not caught by the filter
dissolving in the water. 

The OFF timer cannot be set during drying inside.

Inf

ormation

OFF

Regular 

Regular 

operation

operation

Dehumidifier
Air purifier

Drying inside operation 

(approx. one hour.)

Airflow

Approx.
30min.

Airflow stops; compressor
activates (operating sound)

Compressor operates according 
to room temperature

Approx. 20min.

Compressor
stops

Airflow

Approx.
10min.

Unit
stops
auto-
mati-
cally

Operating

sounds

Automatic operation

To activate drying inside after every use.

¡

Drying inside standby

(Drying inside lamp lit)

Drying inside starts when operation ends

When the unit is turned off or the OFF timer ends.

¡

Drying inside starts

Drying inside lamp flashes.
Power lamp turns off.

Set the louvre upright.

Drying inside mode

¡

Drying inside ends

The Drying inside lamp turns off.

Close the louvre.

<To deactivate automatic operation>

Press the Drying inside button while the unit is on
(the Drying inside lamp turns off)

Manual operation

To activate drying inside by pressing a button.

¡

Drying inside starts

Drying inside lamp flashes.
Power lamp turns off.

Set the louvre upright.

Drying inside mode

¡

Drying inside ends

The Drying inside lamp turns off.

Close the louvre.

e_mj_e16v_s1(10_18)_e33.qx  6/8/05 2:57 PM  Page 11

Содержание MJ-E16V-S1



















Отзывы: