Once every two weeks
14
1
Remove holding
the bottom.
2
Remove
holding the
tabs.
1
Attach holding the
tabs.
2
Hook the top edge
to the top part of
the unit and push
the bottom in.
Hose with lukewarm water when
excessively soiled. Dry well.
The air purifying filter cannot be washed in water.
Replace the air purifying filter when it becomes
dirty.
Face the honeycomb side of
the air purifying filter up and fit
in the inside of the tabs of the
pre-filter.
Front panel
Pre-filter
Honeycomb side
Tabs (6)
Air purifying filter
Pre-filter
Maintenance
Do not use detergents, cleaning agents for heat exchange equipment, abrasive powders, chemically treated dusters,
gasoline, benzene, thinners or other solvents, as they can damage the unit or the water tank, which may result in
leakage.
Water tank · Main unit
Wipe with
a soft cloth.
Floating element
Do not remove or dismantle.
Do not remove
the louvre
front door.
Pre-filter
1
Remove the front panel and pre-
filter.
2
Remove the air purifying filter.
5
Attach the pre-filter and front
panel.
4
Fit the air purifying filter.
3
Clean the pre-filter.
Remove grit with
vacuum cleaner.
¡
The unit draws in dust present in
the air, and this may cause the
tank to
gradually become dirty
.
If the dirt does not come off
easily, wash with cold or warm
water, then wipe with a soft, dry
cloth.
¡
Mildew may form in the tank
unless kept clean.
If the metal fin inside the main unit is
slightly bent, the unit's performance is
not affected.
Cleaning
Debris clogging the pre-filter reduces the effectiveness of the dehumidifier.
Clean once every 2 weeks.
e_mj_e16v_s1(10_18)_e33.qx 6/8/05 2:57 PM Page 14