Mitsubishi Electric melsec q00ucpu, Руководство пользователя

Страница: 506 / 622

12 - 40
CHAPTER12 PECIAL RELAY LIST AND SPECIAL REGISTER LIST
1
2
3
12
6
7
8
12.2 SPECIAL RE
GISTER LIST
(2) System information
Table12.20 Special register
Number Name Meaning Explanation
Set by
(When Set)
Corres-
ponding
ACPU
D9
Corresponding
CPU
SD200 Status of switch
Status of CPU
switch
• The CPU switch status is stored in the following format:
S (Every END
processing)
New
Qn(H)
QnPH
QnPRH
• The CPU switch status is stored in the following format:
S (Every END
processing)
New Q00J/Q00/Q01
• The CPU switch status is stored in the following format:
S (when RUN/
STOP/RESET
switch changed)
New QnU
SD201 LED status
Status of
CPU-LED
• The following bit patterns store the status of the LEDs on the CPU
module:
• 0 is off, 1 is on, and 2 is flicker.
1): RUN 5): BOOT
2): ERR. 6): Empty Mode bit pattern
3): USER 7): Empty 0: OFF 1: Green
4): BAT. 8): MODE 2: Orange
(The Basic model QCPU does not include 3) to 8).)
S (Status
change)
New
Q00J/Q00/Q01
Qn(H)
QnPH
QnPRH
• The following bit patterns store the status of the LEDs on the CPU
module:
• 0 is off, 1 is on, and 2 is flicker.
1): RUN 5): BOOT
2): ERROR 6): Empty
3): USER 7): Empty
4): BAT. 8): MODE
(The Q00UJCPU, Q00UCPU, and Q01UCPU do not include 5).)
S (Status
change)
New QnU
b15 b12 b11 b8 b7 b4 b3 b0
1) 2)
Empty
3)
to to to to
1): CPU switch status
0: RUN
1: STOP
2: L.CLR
2): Memory card
switch
Always OFF
3): DIP switch
b8 through b12 correspond to
SW1 through SW5 of system
setting switch 1.
0: OFF, 1: ON.
b13 through b15 are empty.
b15 b8 b7 b4 b3 b0
1) 2)
Empty
to to
to
1): 0: RUN
1: STOP
2):
CPU switch status
Memory card switch Always OFF
b15 b8 b7 b4 b3 b0
1) 2)
Empty
to to to
1): 0: RUN
1: STOP
2):
CPU switch status
Memory card switch Always OFF
b15 b12b11 b8 b7 b4 b3 b0
1) 2) 4) 3) 5) 6) 8) 7)
to to to to
b15 b12b11 b8 b7 b4 b3 b0
1) 2) 4) 3) 5) 6) 8) 7)
to to to to