Mitsubishi Electric MELSEC-Q-MR-JE-C Скачать руководство пользователя страница 39

Страница: 39 / 70

3 FB LIBRARY

3.2 Details of the FB Library

Function overview

Item

Description

Applicable hardware and

software

Applicable CPU

QnUDVCPU

Applicable engineering tool

GX Works2

Language

Structured Text

Number of basic steps

1188 steps

Function description

This FB adds the specified relative position in the previous positioning command of the specified axis and executes

positioning.

This FB is executed when Execute turns ON, and Busy turns ON when the processing is normally started.

When the processing is completed and positioning of the axis is completed, Done turns ON.

The axis status during positioning control is DiscreteMotion.

This FB can be used when the axis status is Standstill or DiscreteMotion. It cannot be used when the axis status is

ContinuousMotion.

When an error has occurred in the FB, this FB turns ON Error and stores an error code in ErrorID.

For details of error codes, refer to



Page 61 Troubleshooting.

Restrictions and precautions

• Before executing this FB, set the torque limit value (PositiveTorqueLimit, NegativeTorqueLimit) of the AXIS_REF

structure.

• When executing this FB while the continuous control FB is in execution (AxisStatus is ContinuousMotion), execute this FB

with the axis stopped.

• When turning OFF an execution command (Execute) after turning it ON, be sure to turn it OFF after Executing (Busy) is

ON.

• This FB cannot be executed when a positioning warning (alarm number: F4) is occurring in the servo amplifier.

• This FB cannot be used to control the axis of which the unit is set as degree.

• When another positioning control FB is executed with an execution completion (Done) of this FB, do not turn ON the

execution command (Execute) of the another FB to be executed, and turn OFF the execution command (Execute) of the

executed FB in the same scan. Otherwise, an error occurs in the another FB to be executed.

FB operation type

Pulsed execution (multiple scan execution type)

Timing chart

[Normal completion]

[Error completion]

Execute

Busy

Done

CommandAborted

Error

ErrorID

Execute

Busy

Done

CommandAborted

Error

ErrorID

Error code

Содержание MELSEC-Q-MR-JE-C







































































Результаты поиска

Содержание MELSEC-Q-MR-JE-C

Отзывы:

Бренды по названию

Популярные бренды

Mitsubishi Electric MELSEC-Q-MR-JE-C, Справочное руководство

Результаты поиска

Содержание MELSEC-Q-MR-JE-C

Отзывы:

Бренды по названию

Популярные бренды