Mitsubishi Electric meiki series, Инструкция по эксплуатации

Страница: 11 / 34

― 9 ―
1. Set the throttle lever at the slow speed position.
2. Turn the engine switch to the “OFF” position.
(Switch position may vary depending on the
specifications. Refer to the instruction manual of driven
equipment.)
In chase of a push button type switch, keep pressing
the push button till the engine stops completely.
●
Replenish the fuel before using up completely. It will
make easier at the next starting.
●
When there is no subsequent work, drain the fuel from
the fuel tank and restart the engine to use up the fuel
remaining in the carburetor.
CAUTION
Place the engine at a horizontal position when the
driven equipment is not used at the rest time, or
others, in summer season. (If the tank is tilted as much
as the inside of fuel cap is submerged in the fuel, the
fuel may leak.)
Do not touch the engine body, especially the muffler,
during or immediately after stopping the operation.
(There is risk of burn.)
――――――――――――――――――― STOP ――――――――――――――――――――
1
Slow speed
Engine
switch
2
[ ]
KN51051BA英仏_英 10.10.18 0:49 PM ページ 9