Mitsubishi Electric ME96SSHA-MB, Руководство пользователя

Страница: 38 / 70

4. Using Test Mode
37
4.1.
Test Menu 1: Communication Test
In the setting value confirmation mode, when the menu number is set to "9", you will enter the test mode.
SET
SET
Execute communication test operation.
(Values other than zero can be monitored even when the voltage and current are not input.)
■
Monitor value by communication
・
Values displayed on the screen,can be monitored.
Measurement elements not displayed on the screen are zero.
(only power factor is 1.000).
・
If you set the Alarm item with Setting Menu 5, the display will be the same as
the alarm is generating.
■
Display screen
・
As with the operation mode, it is displayed according
to settings such as the display pattern.
・
The maximum/minimum value can be displayed.
(Cyclic display cannot be executed.)
■
Button operation
Operation Function
Press
Switches the display screen.
Press Switches the phase.
Press
Moves or returns to the maximum/minimum
value screen.
Press or Switches the analog bar graph element.
Press and
together for at least 2 seconds.
Change the unit of Wh.
Press Return to the test menu.
Note: When executing a communication test, please read the following manual
in addition to this instruction manual. (For more information refer to page 66.)
･
Electronic Multi-Measuring Instrument ME Series MODBUS® Interface specifications
①
Communication test
DISPLAY
SET
＋
－
PHASE
MAX/MIN
＋
－
<To close test mode>
⇒
Select "End" as the test menu number and then press .
You will return to the operation mode.
Test menu
SET
Set the test menu number to "1".
(as shown in the right figure)
Test menu