Mitsubishi Electric LGF-100GX-E, Руководство пользователя

Страница: 29 / 64

─ 29 ─
Without pulse input (Factory setting)
With delay operation (for 30 minutes) on
Exhaust fan stops oFF
With pulse input on
Without delay operation (Factory setting) oFF
oUT
oFF
Major items
ON/OFF interlocked (Factory setting) Interlocking
item setting Interlock mode
selection onoF
ON interlocked on
OFF interlocked oFF
External input signal priority
Intermediate
items (Names)
Dot matrix
display
Selection
display
Function Notes
Pulse input set-
ting
Delay operation
setting
Exhaust opera-
tion setting dur-
ing air condition-
er defrosting
Exhaust fan operates (Factory setting) on
*10
*11
*5 : Pressing the “fan speed adjustment” button during the power supply/exhaust operation at the start of oper-
ation will result in a change of the fan speed.
*6 : Only the following functions will be supported. “Supply fan speed” “Exhaust fan speed” “Power supply/
exhaust when operation starts”
*7 : The setting of the operation monitor output selection will be disabled when the setting is to Operation moni-
tor output with delay function 1 with the TM4 , output setting switch (SW2-8) on the Lossnay circuit
board, or when the setting is to Operation monitor output with delay function 2 with the TM3 , output
setting switch (SW5-6).
*8 : When clock use is OFF and the simple timer is used, night purge operation will not be performed.
Switching of the ventilation mode will not be possible during night purge operation (Bypass ventilation fixed)
*9 : Refer to (4) Automatic ventilation algorithm temperature map.
*10: External input priority will not be possible when the pulse input setting is ON.
*11: Delayed operation will not be possible when the pulse input setting is ON.
Total operation hours display
Total operation hours of Lossnay ventilation display
Lossnay address switch condition
Self diagnosis (Error history/Error history clear)
Memory clearance
Intermediate Items Major items
Lossnay
address
Normal display (Display when
the Lossnay unit is not running)
Remote Controller Maintenance Mode
(Hold down the A button and simultaneously
press the F button for 2 seconds, or L button)
(Hold down the A button and simultaneously
press the F button for 2 seconds.)
Press the
A button.
Press the
A button.
Press the
B
button.
Press the
B button.
Press the B button.
Press the B button.
Press the
A button.
Press the B button.
Press the
B
button.
Press the B button.
Total operation
hours monitor
Notes
Maintenance mode
This mode displays the total operation hours of Lossnay, checks the Lossnay address, and displays the er-
ror history.
• If the remote controller Maintenance mode is entered during timer operation, the timer operation will be can-
celled. Set timer operation after completing the remote controller Maintenance mode.
• When two remote controllers are used, if one remote controller is set to remote controller Maintenance
mode, “ ” will be displayed in the other remote controller and its operation will be disabled.
• Button response may at times be slow due to communication processing; this is not an error.