(32/71)
Clock setting and logging data clear
When connecting logging unit, you can set the clock of it.
On the date indication in operating mode, press both and at the same time for more than two
seconds to transition to clock setting and enable the following operations.
*Caution: The date is not indicated in operating mode when the logging unit
is not connected.
Clock setting (Year)
Set “Year”.
Setting range: 2000 to 2099
Clock setting (Month)
Set “Month”.
Setting range: 01 (January) to 12 (December)
Clock setting (Day)
Set “Day
Setting range: 01 to 12
Clock setting (Hour)
Set “Hour”.
Setting range: 00 to 23
Clock setting (Minute)
Set “Minute”.
Setting range: 00 to 59
Logging data clear
confirmation
Confirm logging data clear.
･
If you do not clear logging data, choose “no” and press to enter date indication (operating mode).
･
If you clear logging data, choose “yES” and press to transition to below setting.
Caution: If you choose “no” (i.e. do not clear data), the clock setting is not changed.
“no”
(Do not clear data)
“yES”
(Clear data)
SET
SET
Final confirmation
Confirm logging data clear finally.
･
If you do not clear logging data, choose “no” and press to enter date indication (operating mode).
･
If you clear logging data, choose “yES” and press to transition to below setting.
Caution: If you choose “no” (i.e. do not clear data), the clock setting is not changed.
If you choose “yES” (i.e. clear data) here, logging data is cleared, and at the same time, clock
setting is changed.
“no”
(Do not clear data)
“yES”
(Clear data)
SET
SET
- / RESET
+ / PHASE
DISP
SET
DISP
SET
DISP
SET
DISP
DISP
SET
SET
DISP
SET
