••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
6
DISCLAIMER
In any event, Mitsubishi assumes no responsibility or reliability for the following:
1. Disassembly, repair, or alteration of this unit by user or installer.
2. Failure or breakdown in or damage to this unit resulting from misuse or careless handling by user or installer.
3. Inconvenience or damages arising out of inability to display or record images due to any reason or cause other than
breakdown or failure in this unit.
4. Failure in this unit due to combination with other equipment manufactured by a third party or inconvenience or damages
resulting from such failure.
5. Inconvenience, damages, or claims arising out of breakdown in this unit or loss of recorded video data due to replace-
ment of the built-in HDD by user or installer.
6. Inconvenience or damages arising out of breakdown in this unit or inability to display or record images due to natural
disaster including earthquake and storm.
7. Inconvenience, damages, or claims arising out of breakdown in this unit or loss of recorded video data due to impact or
vibration to the built-in HDD or an environmental factor such as temperature at the installation site.
8. Demand for damages or other claim of infringement of privacy if the images monitored or recorded by user become
public or are used for any purpose other than surveillance for whatever reason.
INSTALLATION LOCATION AND HANDLING
•
Place this unit horizontally and in a stable place. If this unit is not placed correctly and used in an unstable place, the unit
may be damaged such as removal of the DVD/CD disc.
•
Do not place this unit close to other electronic or magnetic equipment. This will avoid video and audio distortion.
•
When a monitor and this unit are placed vertically, the pictures may be distorted or DVD/CD disc may not be ejected.
•
Do not let stick your hands into the disc loading slot. You may get your hand caught in the slot and may got injured. If you get
your hand caught, do not get out of the slot by force. Contact your dealer after turning off the power and disconnecting the
plug.
DVD/CD DISC
•
Do not use the disc cracked, deformed or repaired with adhesive. The disc may fly into pieces and cause injury.
•
Do not touch the playback surface when holding the disc.
•
When dew condensation occurs on the disc, wipe the surface off before use.
•
Dirt such as fingerprints or dust causes the deterioration of the picture quality and audio quality. Gently wipe the DVD/CD
disc from the centre to the outside with a soft cloth.
•
When the disc is very dirty, soak a soft cloth with water and screw water of it, wipe off the dirt lightly, then wipe with a dry
cloth.
•
Do not use solvent such as benzine and thinner, a record cleaner, and static-stopper. They may damage the disc.
•
Do not use the disc described below. They may damage the disk itself or this unit.
Discs on which a piece of paper or sticker is put, or a disk damaged.
Discs which the label is peeled or a disk with oozing.
Discs cracked, deformed, or repaired with adhesive.
•
Store the disc in the specified casing, avoiding the following places.
Places where it will be subjected to direct sunlight.
Places with excessive dust.
Places where it will be subjected to high temperatures or high humidity.
•
DVD movie (cinema) or personal recorded picture cannot be played back on this unit. Only the pictures recorded on this unit
can be played back.
•
Do not use the disk which has been used on the personal computer, failed to be copied, or stopped during copying due to
the power failure because they may cause malfunction of the unit.
MAINTENANCE OF THE LENS FOR RECORDING/PLAYBACK (LASER PICKUP)
•
When any dust adheres on the lens for recording/playback, the image may be distorted or the audio may skip. Also normal
recording or playback may not work. Ask your dealer how to correct this problem.
Be careful, do not use the commercial lens cleaning disk, they may damage the lens.
Caution and care (continued)
The hard disk and cooling fan are not permanent items and will need replacing with time. When operated in an ambient
temperature of 25
°
C, it is recommended that both of the hard disk and fan are replaced every 30,000 hours.
(This figure is only a guide, and should not be taken as a guaranteed lifespan of the products. Use the <Elapsed Operating
Time> (System Menu Service Info) as a guide to perform checkups.)
