Mitsubishi Electric DX-PC for View, Руководство пользователя

Страница: 55 / 57

Remote Operation Software (DX-PC For View)
51
Check the box beside
Color Use
and select each status box to use. Click each
selected status box and select the desired color. When done, click the
OK
button.

Unplugged
: Either connection to the remote site has failed, or
Device No.
for the
device is not supported by the remote site.
 Event off
: Event detection function is not set up.
 Irregular
: The device is not working properly.

Video Blind/Video Loss/Motion/Object Detection/Video Analytics/Audio Detection
:
The event is detected.

Alarm In
: Alarm in is detected.

Alarm Out
: Alarm out is detected.
NOTE: Devices are displayed as
Irregular
based on the system check settings and as
Video Loss
,
Motion
,
Alarm In
,
and Alarm Out
based on the event detection settings on the remote DVR.
NOTE: The device displays mixed color when detecting more than two statuses at the same time.
Name Table:
Select
Name Table…
in the
Option
menu to display the name instead of the IP address of
the DVR on the Map panel, and the following
Name Table
setup window appears.
Click the
Display Name
field of each IP address and enter the name of the
DVR to display on the popup screen.
Device Setting
Selecting the
, , or buttons on the toolbar displays the
Camera, AlarmOut
and
AlarmIn
tabs under
the
Image Bar
. Select the icons, and drag and drop them at the desired locations on the background image.
Go to the
Property [Camera/AlarmOut/AlarmIn]
tab and set the device information.
General
 Name
: Enter a device name.
 Description
: Enter description of the device.

Site Information:
Select a proper site for the device in the list, and the
Equipment
fields (
User
,
Password
,
IP Address
and
Port
) are filled automatically with the
information set in
Site Information Setting…
.

Image
: Select an image of a device.

Ratio
: Adjust the size of the device image.

X Coordinates/Y Coordinates
: Adjust the position of the device image by clicking
each field and changing the numbers.

Horizontal/Vertical
: Adjust the size of the device image by clicking each field and
changing the numbers.
 Popup camera
: If the selected device is an alarm-in device, you can associate a
camera with the sensor by entering the camera name. The camera name you enter
should be the same as the camera name entered under the
Property [Camera]
tab.
The Map panel pops up another screen and displays images of the camera associated
with the sensor on the popup screen when an alarm-in event occurs.