Mitsubishi Electric CR800-D Series, Стандартные технические условия

Страница: 38 / 128

2-26 Options
2 Robot arm
(2) Machine cable (replaceable): Flexed type
■ Order type: ●
Flexed type
1F- □□ LUCBL-43 Note) The numbers in the boxes □□ refer the length.
■ Outline
These cables consist of flexed cables, and used for extending the distance
between the controller and the robot arm. Replace the enclosed standard
cables (5m) with these cables.
■ Configuration
Table 2-6: Configuration equipment and types
■ Specifications
The specifications for the fixed type cables are the same as those for standard cables. Shows usage condi-
tions for flexed type cables in
Table 2-7 .
Table 2-7: Conditions for the flexed type cables
[Caution] The guidance of life count may greatly differ according to the usage state items related to Table 2-
7 and to the amount of silicon grease applied in the cableveyor.
Recommendation grease: G-501 (Supplier: Shin-Etsu Chemical Co., Ltd.)
[Caution] When a cableveyor is used, partitions are required to avoid overlapping or riding up of the cables.
Also, adjust the cable length to eliminate tension or excessive looseness, and fix it securely.
Part name Type
Note1)
Note1) The numbers in the boxes □□ refer the length.
Qty.
Mass (kg)
Note2)
Note2) Mass indicates one set.
Remarks
Flexed type machine cable (replaceable) 1F- □□ LUCBL-43 1 cable 11.1 (10m)
15.4 (15m)
19.8 (20m)
10m, 15m or 20m each
Nylon clamp NK-24N 2 pcs. - -
Silicon rubber - 2 pcs. - -
Instruction Manual (cable replacement guide-
lines) BFP-A3691 1pc
- -
Item Specifications
Minimum flexed radius 100mm or more
Cableveyor, etc., occupation rate 50% or less
Maximum movement speed 2,000mm/s or less
Guidance of life count 7.5 million times (With silicone grease coating)
Environmental proof IP54
Cable configuration φ 8.9x3, φ 6.5x6, φ 6.2x4, φ 6x2