56
Usage - Main Menu Settings
Control Panel (cont'd)
Main Menu > Control Panel
Main Menu > Control Panel > Function Key Setting
•
As a default, no functions are assigned to either F1 or F2.
• The F1 and the F2 will be effective only on the HOME screen.
• To use the F1 or F2 button to execute a function, certain settings for Collective Operation must be set.
(Refer to P40 for information about the Collective Operation settings.)
•
If “
” appears on the checkbox, the function that corresponds to the checkbox is not available and the
function cannot be assigned to the F1 or F2 button.
1
2
3
4
2
Assigning Collective Operation functions to the Function 1 button
(F1) and Function 2 button (F2)
Touch the
2
Function Key Setting
button on the [Control Panel] screen.
1. Touch the check mark [
] that corresponds to the function to assign to F1 or F2 so that the checkmark
will appear as [
].
(Check the check mark in the F1 column to assign a function to F1, and check the check mark in the F2
column to assign a function to F2. Touch the button again so that the button will appear as [
] to cancel
the selection.)
2. Touch the
3
Save
button.
3
