Mitsubishi Electric AT-50B, Инструкция

Страница: 42 / 68

42
To select the groups on which to execute the collective operation
(Mode)
1. Touch the
4
Mode button on the [Collective
Operation Setting] screen.
2. Read the pop-up message, and touch the OK button
to confirm.
3. Select the groups to include from the group buttons
labeled A . By default, all groups are selected.
4. Touch the
B Save
button.
• The DIDO controller groups, the LOSSNAY groups, and the Air To Water (PWFY) groups that do not
support this function cannot be selected.
To select the groups on which to execute the collective operation
(Temperature Correction)
1. Touch the
5
Temperature Correction button on the
[Collective Operation Setting] screen.
2. Read the pop-up message, and touch the OK button
to confirm.
3. Select a value to be used as the temperature offset
value from the buttons labeled
C
.
4. Select the groups to include from the group buttons
labeled A . By default, all groups are selected.
5. Touch the B Save button.
• The Temperature Correction function is used to temporarily raise or lower the preset temperature setting
by a certain preselected amount.
• Positive offset is used for units that are operated in the cooling and dry modes, and negative offset is
used for units that are operated in the heating mode.
• The DIDO controller groups, the LOSSNAY groups, and the Air To Water (PWFY) groups that do not
support this function cannot be selected.
• When the operation mode or the temperature setting is changed in the group that is executing the
temperature correction function, the temperature correction will be cancelled.
A
B
Show Group Name List button
Shows a list of group names in a pop-up window.
Select All button
Selects all groups.
B
A
C
Show Group Name List button
Shows a list of group names in a pop-up window.
Select All
button
Selects all groups.
Operation Setting (cont'd)
Usage - Main Menu Settings