MITSUBISHI ELECTRIC ENGINEERING TSD-FT1519-MN, Руководство пользователя

Страница: 27 / 48

Before Using:
Precautions
for Safe Use...
3
2. Precautions For Safe Use
If the device is used with
voltage other than the
specified power-supply voltage,
fire or electric shock may occur.
Use the device with correct
power-supply voltage.
Before using, be sure to read this section for details on correct and safe use.
In the event of malfunction, immediately disconnect the power plug!!
Using this device in a defective state can cause fire and electric shock.
Immediately turn off the power switch, unplug the power plug from the power outlet, and bring your
monitor to your vendor for repair.
Disconnect plug
Do not use
May cause fire or electric shock.
Do not use when the monitor is
malfunctioning (screen does not
display, etc.) or when the monitor is
generating smoke, odd sounds or
odors
Prohibited
Do not put on non-flat or unstable
surfaces.
May drop or fall over, causing injury.
Prohibited
Do not insert foreign objects.
Beware particularly of children.
Do not
disassemble
Do not remove the back cover.
The monitor contains high voltage
components that may cause electrical
shock if touched.
Repair/modification
prohibited
Do not repair or modify.
May cause injury, fire or
electric shock.
Prohibited
Do not play with plastic bags.
Beware particularly of children.
Playing with the plastic bag
used to package this device can cause
suffocation.
Keep away
from water
If water, etc. gets inside the liquid crystal
display, immediately shut off power to the
main unit, unplug the power cord from the
power outlet and contact your vendor.
Using the display when wet may cause
malfunction, fire, electric shock, etc.
Do not place the monitor in the bathroom or in a place
where it can come into contact with water.
Do not put the liquid crystal in your mouth.
Inhaling or drinking the liquid crystal that leaks from
damaged liquid crystal panels can cause poisoning.
If the liquid crystal enters your mouth or eyes, rinse
with water and consult your physician.
Wipe liquid crystal on your hands and clothing with
alcohol, etc., then wash with water.
If metal or combustible material is
inserted from the vent hole, etc., fire or
electrical shock may occur.
In the event that foreign objects are
inserted, turn off the device
immediately to switch off the DC input
power and then consult your vendor.
Warning
Observe the following during setup.
Installing this device in poorly ventilated locations and in certain unsuitable places may cause heat to collect inside the
device or lead to fire or electric shock.
Do not install
Do not place in cramped locations.
Prohibited
Do not lay flat, turn on its side,
or turn up side down.
Do not expose to direct sunlight or
place next to heating appliances.
Do not install