435 L/U Brushcutter
17
Original Instructions Version December 12
Fuelling
Fuel is very flammable. Do not smoke or bring any flame or sparks near fuel.
Always stop the engine and allow it to cool before refuelling.
Refuel outdoors on bare ground, restart engine at least 5m away from the refuelling area.
Use fresh, unleaded petrol (95 RON).
Fuel Storage
Fuel which has been left unused for a period of one month or more may damage the carburettor and result
in the engine failing to start or operate correctly.
When storing the brushcutter for a period of more than one month, empty the fuel tank, and run the engine
to empty the carburettor of fuel.
Stale fuel can cause deterioration of rubber and/or plastic components during prolonged storage.
It is important to only use good quality, fresh fuel.
Fuelling
Clean dirt from around the fuel cap before removing.
Pour fuel into the fuel tank with a filtered funnel, up to 80% of the fuel tank’s capacity.
Replace the fuel cap and tighten securely. Spilled fuel must be wiped away from the machine before starting
the engine.
Move at least 5m away from the refuelling area before restarting the engine.
When refilling the tank, always turn off the engine and allow it to cool down. Take a careful look around
to make sure that there are no sparks or open flames anywhere nearby before refuelling.
