background image

435 L/U Brushcutter

32

Original Instructions Version December 12

CONDITIONS OF WARRANTY

The manufacturer warrants the product against faulty materials and workmanship for a period of 2 years from 
the date of first purchase. The warranty is applicable when the product is used in a “home owner” application. 
If products are used for commercial or professional purposes, the warranty period is for 3 months from the 
date of first purchase. Warranty does not extend to failure due to fair wear and tear.

The manufacturer undertakes to replace, any spare parts that are classified as defective by an appointed 
Mitox service dealer. The manufacturer will not accept liability for the replacement of the machine, either 
partially or wholly, and /or consequential damages and /or interest charges either directly or indirectly.

Warranty does not cover failure due to:

Insufficient maintenance.
Incorrect fuel mixture and stale fuel.
Abnormal use or accidental damage.
Incorrect assembly, adjustment or operation of the product.
Spare parts that are subject to wear e.g. safety parts, blades, blade supports, bearings, cables, guards, 
deflectors, spark plugs, air filters etc.

Neither does warranty extend to:
Freight and packing costs.
Use of non-genuine spare parts i.e. those from another manufacturer.
Use of the machine for any other purpose than that for which it was designed.
Use and maintenance of the machine in a manner not described in the owner’s manual.

As part of our policy of continuous product improvement, we reserve the right to alter or amend this 
specification without notice. As a result, the product may differ from the information contained herein but 
any alteration will only be implemented without notice if it is classified as an improvement to the above 
specification. 

READ THE MANUAL CAREFULLY BEFORE OPERATING THE MACHINE

When ordering spare parts, please quote the part number, this can be found in the parts list included in this 
manual.

Retain the receipt of purchase without which no warranty can be offered.

Distributed by Mitox Garden Machinery
Wincanton Business Park
Wincanton 
Somerset
BA9 9RS

Содержание 435 U

































Отзывы: