Programming
113
Pro
gramming
n
Enable COS option 246 (SMDR - Extended Record) to allow the
calling name to appear in SMDR reports for Inciming calls.
n
Enable COS Option 814 (SMDR - Record ANI/DNIS) to allow
CLID digits to appear in SMDR reports for Incoming calls.
n
Enable COS Option 702 (SMDR - Overwrite Buffer) if SMDR -
Record Incoming Calls Option 806 is Enabled.
3. Form 03, Class of Service (for the sets & stations)
n
Enable COS option 502 (Display ANI/DNIS Information) or COS
option 613 (Display ANI Information Only) to allow display of
CLID digits on display telephones.
n
Enable COS option 503 (Enable Calling Name Display)
n
Enable COS option 702 (SMDR - Overwrite Buffer).
n
Disable COS option 236 (Outgoing Trunk Callback).
n
Disable COS option 237 (Outgoing Trunk Campon).
4. Form 04, System Options/System Timers - Assign a one to five
second value to the System Timer Limited Wait For Dial Tone if
ISDN trunks are present.
n
Enable the MOSS option, Number of Links 0-8 (option 96). If
desired, enable Q.SIG (option 86), NFAS (option 91),
D-Channel Backup (option 92), Min/Max (option 94), and Auto
Min/Max (option 95).
5. Form 13, Trunk Circuit Descriptors
n
Assign the ISDN trunk with a T1 trunk circuit descriptor. To
receive CLID or DDI digits, the ISDN trunk must be a non-DISA
trunk that is programmed with a T1 E&M, T1 E&M DISA, T1 TIE
DISA, or T1 DID/TIE trunk circuit descriptor.
For option 92 to be changed to ENABLED. Option 91 must
already be ENABLED. Similarly, if both are ENABLED, option
92 must be DISABLED first.
For option 95 to be changed to ENABLED. Option 94 must
already be ENABLED. Similarly, if both are ENABLED, option
95 must be DISABLED first.
Содержание SX-200 EL
