Mitel NAVIGATOR Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 53

background image

NAVIGATOR - SIP User and Administrator Guide

44

CAUTION: DO NOT remove power from the phone while firmware is downloading or the
phone is rebooting. This may result in severe damage to your phone.

Troubleshooting Tip:

If your phone displays "SIP MAIN NOT FOUND", it is likely that your

system has experienced a power failure. The SIP Phone Boot firmware "borrows" Flash sectors
from the SIP Main area during firmware installation. At the end of a normal installation, the
sectors are restored without affecting SIP Main. However, if power is removed during Boot
installation, then SIP Main is erased and will have to be reinstalled on the phone.

Automating Firmware Upgrades

You can configure phones to poll the server for new versions of firmware. When the phone
detects a firmware upgrade, it downloads the new version and stores it in memory. When it is
next idle, the phone reboots with the new firmware.

To automate firmware upgrades, your Administrator must set the Firmware Upgrade option and a
polling interval on the Firmware Update page of the Web Configuration Tool. For programming
options, refer to the online help supplied with the Web Configuration Tool.

To upgrade firmware on multiple phones, refer to the

Mass Deployment

topic in the

Administrators Tools section of the Web Configuration Tool Online Help.

Using SIP Enhanced Mode

SIP Enhanced mode enables your Navigator phone to support server-enhanced shared lines
including Sylantro Bridged Line Appearance (BLA) and Broadsoft Shared Call Appearance
(SCA).

Note

: After you enable SIP Enhanced mode on a phone, it becomes a dedicated SIP phone. You

can not toggle back to MiNET mode.

To enable SIP Enhanced mode:

1. From the Web Configuration Tool home page, click

Advanced Features

.

2. In the SIP Enhanced Mode list, select

On

.

3. Click Save and Reboot.

To enable SIP Enhanced mode in the Boot program, refer to the

Configuring Network Settings

section of the Web Configuration Tool online help.

Voice Mail

Voice mail for SIP-supported phones is server-based. For more information on the voice mail
system, contact the SIP Service Provider.

To configure voice mail using the Web Configuration Tool:

•

Access the

User List Config

page.

Use the procedure below for configuring voice mail using the Superkey menu interface.

«
...
48
49
50
51
52
...
»

Содержание NAVIGATOR






















































Отзывы:

Нет отзывов

Похожие инструкции для NAVIGATOR

9520 - Charging Pod For

Бренд: Blackberry Страницы: 2

Бренд: Docomo Страницы: 18

Бренд: LIKUID Страницы: 6

Бренд: i-mobile Страницы: 58

Бренд: Xblue Networks Страницы: 98

Бренд: Sagem Страницы: 92

Бренд: HTC Страницы: 78

Бренд: Matrix Страницы: 1046

Бренд: M4 Страницы: 22

3rd Generation Wi-Fi Phone

Бренд: EZLoop Страницы: 82

Бренд: Samsung Страницы: 223

Бренд: Samsung Страницы: 101

Heaven SCH-U320

Бренд: Samsung Страницы: 174

Бренд: Samsung Страницы: 108

Бренд: Samsung Страницы: 152

Бренд: Samsung Страницы: 30

Бренд: Samsung Страницы: 40

Бренд: Samsung Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды