Mitel NAVIGATOR Скачать руководство пользователя страница 47

Страница: 47 / 53

NAVIGATOR - SIP User and Administrator Guide

Device Parameters

To view the software version and the MAC address:

1. Press

(

SUPERKEY

), and then press

until ADMIN TOOLS? appears on the display.

2. Press

. DEVICE PARAMETERS? appears.

3. Press

. SOFTWARE VERSION appears.

4. View either the software version or the MAC address.

•

To view the software version, press

REVIEW

(the current software version appears), then

press

. SOFTWARE VERSION reappears.

•

To view the MAC address, press

NEXT

(MAC ADDRESS appears), then press

REVIEW

The current MAC address appears. Press

. MAC ADDRESS reappears.

5. Do one of the following:

•

To return to the main menu, press

EXIT

•

To return to the default display, press

(

SUPERKEY

Note:

You can also view the MAC address using the

Line 1

key (see

View the IP and MAC

Addresses

on page 3).

Protocols

For information about supported communication and media protocols, access the Web
Configuration Tool online Help (see

Access the Web Configuration Tool Online Help

on page 3).

Enable/Disable Protocols

To enable/disable protocols using the Web Configuration Tool:

•

Access the tool’s

Protocols

page.

Note:

To access the Web Configuration Tool, HTTP must be enabled. If HTTP is disabled

and you need to access the tool, enable HTTP through the Superkey Menu Interface (see
procedure that follows below).

To enable/disable protocols using the Superkey Menu Interface:

1. Press

(

SUPERKEY

), and then press

until ADMIN TOOLS? appears on the display.

2. Press

, and then press

▼

until ACCESS PROTOCOLS? appears on the display.

3. Press

, enter your administrator password, and then press

SUBMIT

. HTTP <current

status> appears on the display.

4. Do one of the following:

Содержание NAVIGATOR






















































Результаты поиска

Содержание NAVIGATOR

Отзывы:

Похожие инструкции для NAVIGATOR

Бренды по названию

Популярные бренды

Mitel NAVIGATOR, Руководство пользователя и администратора

Результаты поиска

Содержание NAVIGATOR

Отзывы:

Похожие инструкции для NAVIGATOR

Бренды по названию

Популярные бренды