Mitel NAVIGATOR Скачать руководство пользователя страница 35

Страница: 35 / 53

NAVIGATOR - SIP User and Administrator Guide

4. Press

▼

to navigate to the desired Call Forward option.

5. Press

to select the desired Call Forward option.

6. Press

REVIEW

. The current forwarding destination appears. If no forwarding is programmed,

the top line of the display is blank.

7. For

Call Forward No Answer

option only, press

OPTIONS

, enter the number of desired

rings (1 – 99) before a call is forwarded, and then press

SAVE

8. Press

CHANGE

, and then do one of the following:

•

To enter a URL as the destination, press

URL

, and then enter the URL.

•

To enter a name as the destination, press

NAME

, and then enter the name.

9. Press

SAVE

. After the information is saved, the same Call Forwarding option appears on the

display with its new status.

10. Do one of the following:

•

To return to the main menu, press

EXIT

•

To return to the default display, press

(

SUPERKEY

Enable/Disable Call Forward

1. Press

(

SUPERKEY

), and then press

until SETTINGS & OPTIONS? appears.

2. Press

. CALL FORWARDING? appears.

3. Press

. FWD ALWAYS: <current status> appears.

4. Press

▼

to navigate to the desired Call Forward option.

5. Once the desired Call Forwarding option appears, press

TURNON

TURNOFF

to enable or

disable the Call Forwarding option. The Call Forwarding option and its new status appears on
the display.

6. Press

, and then press

(

SUPERKEY

) to return to the default display.

Call Transfer

You can transfer an active call to another party (one line must be free on your phone).The
Navigator supports three lines. If all lines are busy on your phone, no calls can be transferred.

Note:

During a conference call, any party can perform a call transfer when one line on the

phone that initiated the conference call is not in use. For conference call information, see

Conference Call (Three-Way)

on page 3.

Transfer a Call to an Unconnected Third Party

1. While on a call, press

(

TRANS/CONF

). The call is put on hold.

2. Press a free Line key.

3. Call the party to whom you want to transfer the call, and then do one of the following:

Содержание NAVIGATOR






















































Результаты поиска

Содержание NAVIGATOR

Отзывы:

Похожие инструкции для NAVIGATOR

Бренды по названию

Популярные бренды

Mitel NAVIGATOR, Руководство пользователя и администратора

Результаты поиска

Содержание NAVIGATOR

Отзывы:

Похожие инструкции для NAVIGATOR

Бренды по названию

Популярные бренды