Mitel NAVIGATOR Скачать руководство пользователя страница 49

Страница: 49 / 53

NAVIGATOR - SIP User and Administrator Guide

7. Press

(

SUPERKEY

) to return to the default display.

8. For the settings to take effect, reboot the phone (i.e. unplug the power source from the

phone, and then plug the power source back in).

Upgrade the Phone’s Firmware

IMPORTANT! You must upgrade to Release 5.0.0.20 before upgrading to Release 6.0. See
the Release Notes for SIP Release 6.0 available at http://sipdnld.mitel.com/.

For detailed information about firmware upgrades:

•

Access the

About Firmware Updates Page

in the Administrator’s

Web Configuration Tool

Online Help

(see page 3).

View the Firmware Version

To view the firmware version using the Web Configuration Tool:

•

Access the

Home Page

of the Web Configuration Tool.

To view the firmware version using the Superkey Menu Interface

1. Press

(

SUPERKEY

2. Press the

Line 2

key. Both the main and boot firmware versions appear on the display.

3. Press

(

SUPERKEY

) to return to the default display.

Upgrading the Firmware

To upgrade the firmware using the Web Configuration Tool:

•

Access the

Network Configuration

and

Firmware Update

pages of the Web Configuration

Tool.

To upgrade the phone’s firmware through the Superkey Menu Interface:

1. Press

(

SUPERKEY

), and then press

until SETTINGS & OPTIONS? appears.

2. Press

, and then press

▼

until UPGRADE FIRMWARE? appears.

3. Press

. CHOOSE PROTOCOL appears.

4. Press the desired protocol (

HTTP

TFTP

), or press

AUTO

. BEGIN UPGRADE NOW?

appears.

5. Press

CONFIRM

. The downloading process begins and the phone reboots. This process may

take approximately 1 to 2 minutes. When the time and date appear on the display, the
download and reboot is complete and the phone is ready for use.

To upgrade the firmware from the boot program:

•

Access the

Configuring in the Main and Boot Programs

topic in the Administrator’s

Web

Configuration Tool Online Help

(see page 3).

Содержание NAVIGATOR






















































Результаты поиска

Содержание NAVIGATOR

Отзывы:

Похожие инструкции для NAVIGATOR

Бренды по названию

Популярные бренды

Mitel NAVIGATOR, Руководство пользователя и администратора

Результаты поиска

Содержание NAVIGATOR

Отзывы:

Похожие инструкции для NAVIGATOR

Бренды по названию

Популярные бренды