Mitel DBC220 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 69

Mitel DBC220 Скачать руководство пользователя страница 60

1/1553-ANF 901 54 Uen E5 2016-05-16

60

S

ETTINGS

The same procedure is used to program ringing signal options for additional lines and
multiple represented lines. Press the corresponding additional line/multiple repre-
sented line-key and dial the corresponding digit in the same way as above.

10.1.8

TO PROGRAM RINGING SIGNAL TONE CHARACTER

Ringing signals are generated in the telephone loudspeaker by a tone ringer. The
selection of one of ten different ringing signals tone characters can be made in
programming mode. Each tone corresponds to a digit between 0 to 9. The following
procedure is used:

•

Press the Program-key (the program lamp turns ON and the display indicates the
current ringing tone programmed for the telephone)

•

In on-hook with no speaking, the Program-key must be pressed and held down
during the programming sequence (the program lamp turns ON and all other
lamps turn OFF).

•

Press a digit-key. The telephone acknowledges with a ringing signal with a tone
that corresponds to the pressed digit. You may try different characters until you
find a satisfactory one.

•

Press the Program-key (the program lamp turns OFF).

10.1.9

TO PROGRAM RINGING SIGNAL MELODY

Note:

Not applicable.

«
...
58
59
60
61
62
...
»

Содержание DBC220






































































Отзывы:

Нет отзывов