Mitel 5224 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 64

Mitel 5224 Скачать руководство пользователя страница 31

-25-

Call Park

To park a call that is on your prime line (Line 1 key), do one of the
following:

z

Press the Call Park feature key.
-

OR

-

Press TRANS/CONF and then dial *33.

The call is parked and you receive dial tone on your prime line.

To retrieve a parked call from your phone while your phone is idle, or
while you are off-hook and hearing dial tone, do one of the following:

z

Press the Call Park feature key.
-

OR

-

Dial *22.

To retrieve a parked call while you are on a call on your prime line, do
one of the following:

z

Press the Call Park feature key.
-

OR

-

Press TRANS/CONF and then dial *22.
You are connected to the parked call and the caller that was on your prime
line is parked.

You are connected to the parked call and the caller that was on your prime
line is parked.

To retrieve a parked call from another phone:

1. Lift the handset.
2. Dial *23.
3. Dial the prime line number (extension number) of the phone that parked

the call.

Note: If the phone has both a parked call and a call on hold, dialing the
Remote Hold Retrieve access code will retrieve the parked call.

«
...
29
30
31
32
33
...
»

Содержание 5224

































































Отзывы:

Нет отзывов