Mitel 5224 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 64

Mitel 5224 Скачать руководство пользователя страница 24

-18-

Mute

Mute lets you temporarily turn your phone's handsfree speaker microphone
off during a call. You can also mute your handset microphone—see the
Handset Mute feature description elsewhere in this guide.

To turn Mute on during a call:

z

Press (MUTE). The (MUTE) light turns ON.

To turn Mute off and return to the conversation:

z

Press (MUTE). The (MUTE) turns OFF.

Handset Mute

To mute your handset's microphone during a call:

z

Press the Handset Mute feature key.

To restore handset microphone operation:

z

Press the Handset Mute feature key again.

Transfer

To Transfer an active call:

1. Press

(TRANS/CONF).

2. Dial the number of the third party.
3. Do one of the following:

To complete the Transfer, hang up.

To announce the Transfer, wait for an answer, consult, and hang up.

To cancel the Transfer, press (CANCEL).

To transfer an active call during headset operation:

1. Press

(TRANS/CONF).

2. Dial the number of the third party.
3. To complete the Transfer, press the Release feature key.

«
...
22
23
24
25
26
...
»

Содержание 5224

































































Отзывы:

Нет отзывов