Registration
37
Registration
Over Air Registration
To subscribe to a new system, you need to know the “Park:” (Portable Access Right Key code)
and “Ac:” (Authentication code) related to the system to which you want to log on. Contact your
system administrator for more information.
Caution:The master LDAP Server must be running when you register a new handset.Do
not register a new handset when the master LDAP Server is down even if you have a
standby LDAP Server. Handsets that are registered to a standby LDAP server must be
re-registered with the master LDAP server when it comes back into service.
1.
With the Settings tab selected, press the Down navigation key to enter the Settings menu.
2.
Use the Down navigation key to highlight
System
and then press the Right navigation key.
3.
Use the Down navigation key to highlight
Register
, and then press the Right navigation key.
4.
Press the Down navigation key to enter the system menu and then press
New
.
5.
Enter the new system name and then press OK. The set displays its IPDI number.
6.
Press OK.
7.
When prompted, enter the PARK code and then press OK.
8.
When prompted, enter the AC code and then press OK. The handset searches for the
corresponding system, attempts to register, and then indicates success or failure.
9.
If the handset is new to the system, do the following:
-
dial the number assigned to the handset and then press
ON
-
when you receive a busy signal, press
OFF
to hang up
10.
To complete the registration, press
ON
and then press
OFF
.
Login Users
After a handset is registered on the system, you will see the following on the display: "Please
login."
•
Enter the Master ID (Park: (Portable Access Right Key code), extension and optional AC
code and hang up.
For example, where 0 is the Master ID, 200 is the extension, and 1234 is the AC code:
*0*200*1234#