5606 Wireless Handset User Guide
10
3.
Use the Down navigation key to highlight
Local Phonebook
.
4.
Press the Right navigation key to display the name list.
5.
Navigate the list using the Up and Down navigation keys. When the appropriate selection
is highlighted, press the
ON
button.
Answer a Call
Incoming calls are indicated by a flashing LED accompanied by a ring signal and/or a vibrating
handset. Both the ring signal and the vibrator can be disabled. If supported by your ICP, the
calling party’s phone number and/or name is shown. The name is also shown if the calling
party’s phone number is stored in your Local phonebook.
•
Press the
ON
button to answer the call. When a headset is connected to the handset, the
answering button on the headset can be used to answer the call.
You can set custom answering methods using the Modes menu (see “Modes Menu” on
page 22). You can also enable the Quick Answer feature (see “Enable/Disable Quick Answer”
on page 31).
End a Call
•
Press the
OFF
button or place the handset in the charger. When a headset is connected
to the handset, the button on the headset can be used to end the call. All connected calls
are ended. The total call time is shown in the display.
Decline an incoming call
•
Press the
OFF
button to decline an incoming call.
Note:
Depending on settings, it is possible to answer a call using the "Volume up" button.
To avoid an accidental press on the "Volume up" button or "Mute" button, either or both
of these settings can be disabled.
