MiTAC E8020, Руководство пользователя

Страница: 117 / 132

112
5.5.4
Other OEM Command Set
Restore Factory Default Command
Net Function = 32h (OEM)
Code Command Request, Response Data Description
66h Restore Factory Default Request: NA
Respones:
Byte 1 – Completion code.
When send this command to BMC, the LAN Configuration Parameters
will be changed current setting value to default value as following:
1. IP Address Source = 0x00(DHCP)
2. The Network sequence priority default is Mezzanine card for
PVT/MP.
3. The MEZZ protocol priority default is NCSI for PVT/MP.
4.
User IDs
(User/Password/Privilege/Channels).
5.
Debug Console Serial Parameters.
6. Product Information
- Product ID.
- Manufacturer ID
Remove all the special settings such as different priority, but SEL will
not remove.
(Note: The BMC will reset itself after restore to default.)
Get 80 Port Record Command
Net Function = 30h (OEM)
Code Command Request, Response Data Description
49h Get 80 Port Record Request: N/A
Response: Byte 1 – Completion code.
Byte 2:N – POST code.
Replay the last port 80 POST codes
(up to 256x POST records).
N: maximum number = 256
Get CPLD Information Command
Net Function = 3Ch (OEM)
Code Command Request/ Response Data Description
88h Get CPLD Information Request: N/A
Response:
Byte 1 – Completion code.
Byte 2 – CPLD version number.
Byte 3:6 – Device ID(LSB first).
Byte 7:10 – Checksum(LSB first).
1. Get CPLD version via
CPLD SGPIO by
BMC.
2. Get CPLD Device ID
via JTAG interface
by BMC.