8050
8050
D N/B Maintenance
D N/B Maintenance
60
8. Carefully pull the antenna wires out. Now you can lift up the LCD ASSY from base unit. (Figure 2-24)
Figure 2-24 Free the LCD ASSY
1. Attach the LCD assembly to the base unit and secure with four screws.
2. Rip the antenna wires back into Min-PCI compartment.
3. Reconnect the two cables to the system board. Screw the hinge covers by two screws.
4. Replace the shield and secure with eight screws.
5. Replace the top cover and secure with two screws. And reconnect the touch pad’s cable.
6. Upside down the notebook. secure the housing by nineteen screws and secure two screws in the rear.
7. Replace the Wireless card, CD/DVD-ROM, hard disk drive, CPU, keyboard and battery pack. (Refer to
sections 2.2.6, 2.2.5, 2.2.4, 2.2.3, 2.2.2 and 2.2.1 reassembly)
Reassembly
MiTac Secret
Confidential Document