background image

2

Welcome, 

Thank you for choosing Mission Communications for your monitoring and alarm 

needs.

This document is intended for installers experienced with the M110 and M800  

series (Legacy series) remote terminal unit (RTU) installations and those          

upgrading M110 and M800 to MyDro RTUs. This manual highlights some of the 

differences between the Legacy series and MyDro series RTUs to aid in your 

next installation or upgrade.

At Mission, it is our goal to provide customers with the latest technology and 

designs while ensuring great value. A wide range of information is accessible 

through the web portal. You may also use your smartphone to scan the QR 

codes in this manual, which will take you to the corresponding document on our 

website. 

We encourage you to take advantage of our quarterly newsletters, training      

videos, and weekly webinars. Visit 123mc.com to contact us or learn more about 

our training resources. Our technical support staff is available by calling  

(877) 993-1911, option 2.

Thank you,

The Mission Team

WARNING

: This symbol indicates there is caution or warning to avoid 

damage to your property or product. 

WARNING

: Follow requirements for field wiring installation and 

grounding as described in NEC and your local/state electrical codes.  

NOTE

: This symbol indicates that there is something that requires 

your special attention. 

This device complies with part 15 of the FFC Rules. Operation is subject to 

the following two conditions: (1) This device may not cause harmful interfer-

ence, and (2) this device must accept any interference received, including 

interference that may cause undesired operation.

Содержание MyDro 150

























Отзывы: