Mirpol Jumper 10FT, Инструкция по сборке и эксплуатации, Страница: 80 / 84

80
JUMPER Trampoline EN | USER MANUAL
STEP 4
Place the #H safety net on the trampoline mat. Attach the top of the Safety Net #H to the Tube Cap #C mounted on the
Top Framing Tubes #A using the Safety Net Clips.
Note: Make sure the buckles are tight. See the picture below. Repeat these steps until all framing tubes are assembled.
STEP 5
Attach the bottom of the net #H to the mat’s rings with the fixing strap #G. Tie one end of the string to the circle on
the trampoline mat, then thread the strap through the bottom of the safety net and through the next circle on the mat.
Thread the strap through the net every 3 or 4 triangle holes and through all the circles on the trampoline mat. See the
figure below.
Now securely tie both ends of the strap.
STEP 5
STEP 4