125
Appendix B: Using the Configurator
Master Telephone only appears in the Adder Type Combo Box if the annunciator does not
already have one. It consumes one frame. It is initially set up to have all of the required
standard LEDs and switches and the display items should not be edited.
Adding Telephone/Page Selectors for Telephones
Any number of Telephone/Page Selector adders can be added to each RAX LCD Annunciator
or to the Base Panel's Main Display, up to the maximum frame count for an Annunciator. An
Annunciator can accommodate 14 frames: A Telephone/Page Selector occupies 2 frames.
Invoke the Add Display Adder function. This can be done...
•
By pressing the right mouse button, with focus on the tree item representing either an
annunciator or another display adder belonging to an annunciator.
•
By using the Insert menu and choosing Add Display Adder.
The following dialog appears.
A Telephone/Page Selector is added to the current Annunciator. It has 24 switch positions, all
of which are initially un-assigned. They can be configured as Phone Select, Dig Msg or Page
Select.
Assigning Selector Switches
Any of the 24 switch positions can be edited to be assigned as Phone Sel. You can also assign
each switch a different Tag 1.
When a Phone Sel switch is highlighted, the lower pane shows its correlations.
Correlating Selector Switches to Telephones
The following constraints are applied to Telephone / Switch correlations.
•
Each dual LED/Switch combination on a Selector can control and annunciate only one
telephone (conventional circuit or addressable module).
Содержание Flex-Net Phase II
