Mircom Flex-Net Phase II, Инструкция по применению

Страница: 63 / 132

62
Appendix B: Using the Configurator
Add Display Adder
This dialog is displayed in response to an Add Display Adder command.
Select Adder Type - This control lists valid adder types.
The list only shows adder types that are allowed for the chosen annunciator.
Select Header - This control lists the headers (connectors) of the annunciator.
You may distribute display adders among the headers if an annunciator lists more than one.
Add - Press Add to insert an adder of the selected type. The Job Tree will be updated to show
the new adder. If the frame limit for the annunciator/header is exceeded an error message will
be displayed. Some Adders consume two or three frames.
The dialog remains open for adding more Display Adders. Press Close to dismiss the dialog.
Add Loop Controller
This dialog appears in response to an Add Loop Controller command.
Type - Choose the type of adder you want to add. Different products may list different options.
You can typically choose between an Addressable Loop and a Conventional.
Number to add - Enter the number of loop controllers you want to add.
Tag - Enter the optional tag to describe the loop controller.