Mirapoint RazorSafe 700, Руководство по оборудованию

Страница: 67 / 98

System Battery
61
To remove the system battery:
1.
Power off the appliance, including any attached peripherals, and disconnect the
appliance from the electrical outlet.
2. Open the appliance. See Opening the Appliance on page 30.
3.
Remove the fan bracket. See Removing the Fan Bracket on page 39.
4.
Locate the battery socket. See System-Board Connectors on page 85.
b
To avoid damage to the battery connector, you must firmly support the
connector while installing or removing a battery.
5.
Remove the system battery.
a.
Support the battery connector by pressing down firmly on the positive side
of the connector.
b. Press the battery toward the positive side of the connector and lift it up out
of the securing tabs at the negative side of the connector (
Figure 30 ).
Figure 30 Installing the System Battery
Installing the System Battery
To install the system battery:
1. Support the battery connector by pressing down firmly on the positive side of
the connector.
2.
Hold the battery with the + facing up, and slide it under the securing tabs at the
positive side of the connector (
Figure 30 ).
3. Press the battery straight down into the connector until it snaps into place.
4. Install the fan bracket. See Installing the Fan Bracket on page 39.
5. Close the appliance. See Closing the Appliance on page 30.
6.
Reconnect the appliance to the electrical outlet and power the appliance on,
including any attached peripherals.
1 positive side of battery connector 2 system battery
3 negative side of battery connector
2
3
1