Mirapoint RazorSafe 170, Руководство по оборудованию

Страница: 49 / 76

Processors
49
Figure 16 Installing and Removing a Processor
Installing a Processor
c
Only trained service technicians are authorized to remove the appliance cover and
access any of the components inside the appliance. Before you begin this procedure,
review the safety instructions that came with the appliance.
To install a processor:
1. If you are upgrading your processor, prior to upgrading your appliance, contact
your Mirapoint Support representative.
2. Unpack the processor if it has not been used previously.
If the processor has already been used, remove any thermal grease from the top
of the processor using a lint-free cloth.
3.
Align the processor with the socket keys on the ZIF socket ( Figure 16 ).
c
Positioning the processor incorrectly can permanently damage the system-board or
the processor. Be careful not to bend the pins in the socket.
4. Install the processor in the socket.
1 processor 2 notch in processor
3 socket key 4 ZIF socket
5 processor shield 6 socket-release lever
1
5
4
6
3
2