Mirapoint RazorSafe 170, Руководство по оборудованию

Страница: 21 / 76

Appliance Messages
21
TPM configuration
operation honored.
System will now
reset. A Trusted Platform
Module (TPM)
configuration command
has been entered. The
appliance reboots and
executes the command. Information only.
TPM configuration
operation is
pending. Press (I) to
Ignore OR (M) to
Modify to allow
this change and
reset the appliance.
WARNING :
Modifying could
prevent security.
This message displays
during appliance restart
after a TPM
configuration command
has been entered. User
interaction is required
to proceed. Enter I or M to proceed.
TPM failure. A TPM function has
failed. See Getting Technical Support on
page 3.
Unable to launch
System Services
image. System
halted! System halted after F10
keystroke because
System Services image is
either corrupted in the
appliance firmware or
has been lost due to
system-board
replacement. Restart the appliance and update the
USC repository to the latest software
to restore full functionality. See the
USC user documentation for more
information.
Unexpected
interrupt in
protected mode. Improperly seated
memory modules or
faulty keyboard/mouse
controller chip. Reseat the memory modules. See
Troubleshooting Memory on page 65.
If the problem persists, see Getting
Technical Support on page 3.
Unsupported CPU
combination.
Unsupported CPU
stepping detected. Processor is not
supported by the
appliance. Install a supported processor. See
Processors on page 47.
Unsupported
DIMM detected.
The following
DIMM has been
disabled:
x
Invalid memory
configuration. The
appliance runs but with
the specified memory
module disabled. Ensure that the memory modules are
installed in a valid configuration. See
General Memory Module Installation
Guidelines
on page 42.
Unsupported
memory
configuration.
DIMM mismatch
across slots
detected:
x , x , ...
Invalid memory
configuration. Memory
modules are
mismatched in the
specified slots. Ensure that the memory modules are
installed in a valid configuration. See
General Memory Module Installation
Guidelines
on page 42.
Table 4 Appliance Messages (Continued)
Message Causes Corrective Actions