GUIDE TO INSTALLATION AND OPERATION
HMP-1801 |
29
Status icon area:
Status icons are provided for these functions:
•
AFD
•
Dolby metadata
•
Time code
•
Closed Caption
•
Name Dropper
•
Audio (16 channels)
3.4.6 The Media Manager panel
The Media Manager panel has a single button, located in the center of the panel:
Click this button to open the HMP-18x1 Ingest and Configuration Utility.
•
Note that an Ethernet connection to the HMP-1801 rear panel is required to load the media management utility
This utility is used to import and export video and audio essences and Clip Lists to/from the HMP-1801, and to
configure the characteristics of those essences.
•
See section 4.1 for a complete explanation of this utility
3.4.7 The Reference panel
3.4.7.1 The Reference / Reference tab
The status icons in the Reference Presence area indicate the
presence or absence of an external reference, or the Densité
frame’s URS signal.
Use the radio buttons in the Reference Source area to select
from the following options:
•
Auto – this mode selects the first source detected in this
order of priority:
o
External reference
o
URS
o
Internal reference
•
External – selects the signal connected to the rear-panel
REF IN connector
•
URS (Universal Reference Signal) – selects the internal
reference from the backplane of the Densité frame (from an
REF-1801 card if present)
•
Internal – uses an internal free-running sync generator.
URS Format – use the radio buttons in the URS Format area to
select whether the URS is OFF, 29.97 Hz or 25 Hz.
Note that changing the reference input while the card is playing
a clip will stop the playback.
Figure 3.21 Reference panel – Reference tab
