Miranda HMP-1801 Скачать руководство пользователя страница 27

Страница: 27 / 77

GUIDE TO INSTALLATION AND OPERATION

HMP-1801 |

3.4.3.8 The Playback / GPI tab

This tab allows the user to configure the functionality of the 6
GPI IN lines accessible on the rear panel GPI connector (see
Section 2.3.2).

For each of the six GPI inputs:

•

Use the

GPI IN Function

pulldown to select the action that

will be taken when the GPI is triggered. The choices are:

OFF – no action

CUE – cue a clip (see next bullet)

CUE & PLAY – cue a clip, and play it immediately
when cued

PLAY – play the cued clip

PAUSE – pause the clip that is playing.



Use PLAY to resume playback from the same

place.

STOP – stop the clip. Must be re-cued before it can
be played again

•

If CUE or CUE & PLAY is selected, the

Clip to Cue

pulldown is activated, showing all available clips. Select the

clip that will be cued or cued and played when this GPI is triggered.

3.4.3.9 The Setting / Record tab

The Record tab in the settings panel is only available when the HMP-1801 is in the

Record

mode

•

When the HMP-1801 is in the

Playback

mode, this tab will be gray and non-functional

•

To change over to

Record

mode when in

Playback

mode,

open the Record panel and click the Enable Record button
(see section 3.4.5)

When enabled, the Record tab displays four sub-tabs, which are
described below:

•

Video

•

Audio (requires Audio option)

•

ANC

•

GPI

3.4.3.10 The Record / Video tab

This panel allows the user to set the encoding bit rate for the
recording process.

SD and HD bitrates are set separately.

•

Maximum is 100 Mbps

Use the sliders or type directly into the databox to set the
appropriate values.

Figure 3.11 Setting / Playback / GPI tab

Figure 3.12 Setting / Record / Video tab

Содержание HMP-1801














































































Результаты поиска

Содержание HMP-1801

Отзывы:

Похожие инструкции для HMP-1801

Бренды по названию

Популярные бренды

Miranda HMP-1801, Руководство по установке и эксплуатации

Результаты поиска

Содержание HMP-1801

Отзывы:

Похожие инструкции для HMP-1801

Бренды по названию

Популярные бренды