GUIDE TO INSTALLATION AND OPERATION
HMP-1801 |
25
3.4.3.13 The Record / GPI tab
This panel allows the user to configure the functionality of the 6
GPI IN lines accessible on the rear panel GPI connector (see
Section 2.3.2).
For each of the six GPI inputs:
•
Use the
GPI IN Function
pulldown to select the action that
will be taken when the GPI is triggered. The choices are:
OFF – no action
RECORD – Start the record process
STOP – stop the record process.
3.4.4 The Playback panel
This panel provides controls for operating the playback features
of the HMP-1801.
If the HMP-1801 is currently in RECORD mode, this panel will
display a single button:
Click on this button to switch the HMP-1801 from Record
mode to Playback mode.
The panel display will change to show the playback operating
controls, as described here.
The window lists all the Clip Lists currently available for
playback on this card
•
Click the Refresh Clip List button to update the list (useful
when maintenance operations are in progress)
Click on a Clip List in the window to select it.
•
The selected Clip List is highlighted
•
The selected Clip List can be cued and played using the controls beneath the window, as detailed below
The characteristics of the selected Clip List can be displayed by clicking the Properties button above the window.
•
These characteristics are specified using the
Ingest and Configuration Utility
, as described in Section 4.1.3.3.
•
They cannot be changed here
Figure 3.16 Clip Playback panel
Figure 3.15 Setting / Record / GPI tab
