BEFORE YOU BEGIN
Carefully inspect the new toilet for damage.
If the existing toilet does not have a supply
shut-off valve below the tank, install one
before installing the new toilet.
CAUTION
Risk of personal injury or
product damage.
Handle with care. Vitreous china can break
or chip if the product is handled carelessly.
To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also be sure your installation conforms to local
codes.
NOTE: Pictures may not exactly define contour of china and components.
REMOVE OLD TOILET
a. Close toilet supply valve and flush tank completely.
Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line.
NOTE: If replacing valve, first shut off main watch supply!
c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping
sewer gases.
d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE: Mounting surface must be clean and level before new toilet is installed!
CAUTION: PRODUCT IS FRAGILE.
TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
TOOLS AND MATERIALS NEEDED
A: Screwdriver
B: Wrench
C: Tape measure
D: Level
E: Drill
F: Flange
G: Wax seal
H: Marker
I: Flexible Supply Lines
